BUILDING AN ENCLOSURE To work properly, the walls of the enclosure must be rigid and not flex when subjected to the high pressures generated by the speaker's operation. For optimum performance, we recommend using 3/4" MDF (Medium Density Fiberboard) and internal bracing.The enclosure should be glued together and secured with nails or screws.
SUBWOOFER CROSSOVERS There are two operational types of crossovers, passive and active. Passive crossovers (coils or inductors) are placed on the speaker leads between the amplifier and speaker. An active crossover is an electronic filter that separates the audio signal fed to different amplifiers. For optimum subwoofer performance, we recommend using an active 80-100Hz low-pass crossover at 12dB/octave.
Page 4
Español PRECAUCIÓN: Antes de la instalación, desconecte el terminal negativo de la batería (-) para prevenir daño a la unidad, incendio y/o posibles lesiones. PRACTIQUE EL SONIDO SEGURO El contacto continuo con niveles de presión de sonido superiores a 100 dB puede causar la pérdida permanente de la audición.
Need help?
Do you have a question about the Prime R1S410 and is the answer not in the manual?
Questions and answers