Simulation Mode - Two notes Audio Engineering Torpedo C.A.B. User Manual

Last update:
2018/03/02 torpedo_cab:torpedo_c.a.b._user_s_manual http://wiki.two-notes.com/doku.php?id=torpedo_cab:torpedo_c.a.b._user_s_manual
14:38
In the simplified interface of the Arcade mode, each parameter actually controls one or several
parameters of the Simulation mode. For more details on the Simulation mode, see its description later
in this document.
The parameters of the Arcade mode are listed below:
Instrument: Guitar or Bass, determine the type of speaker cabinet you can access and select
later, the power amp type and parameters and EQ characteristics of the Contour parameter.
Speaker: Pick a speaker cabinet in the list, the list depends on the Instrument parameter and
the cabinets you actually loaded into you product's memory.
Mic: Select a microphone in the list.
Room: Select one of the 8 rooms.
Power amp: In Guitar mode we selected an EL34 Pentode PP power amp and a 6L6 Pentode PP
power amp for Bass. Presence and Depth are fixed at 100%. The Power amp parameter
determine the amp master volume, from Cold to Hot. it can also be turned OFF.
Distance: In Arcade mode, Distance triggers both the mic placement algorithm (IR synthesis)
and the Dry/Wet of the Reverb. The farther the microphone is from the cabinet, the more you
will hear the reverb effect. The microphone is always in front of the cabinet.
Tone: Miking tone, from Dark to Bright. Triggers the Center parameter, moving the microphone
from the center of the speaker to the side.
Contour: EQ settings based on a loudness algorithm. Vintage will cut low and high frequencies
while Modern will emphasize them. The EQ parameters depends on the Guitar/Bass setting.
Level: Controls the level of the preset, from -95dB to 0dB.

4.6.2 Simulation mode

http://wiki.two-notes.com/ Printed on 2018/06/02 11:40