Legal notices ...11 90-Day Limited Warranty...13 Introduction Congratulations on your purchase of the Rocketfish RF-GPS3009 PS3 wireless racing wheel. This racing wheel represents the state of the art in wireless racing wheel design and is designed for reliable and trouble-free performance.
• Large and durable suction cups that firmly attach the racing wheel to a flat surface to make the racing wheel easy to operate • 270 degree steering angle • Foot pedal with springs that give you a realistic driving experience RF-GPS3009...
Foot pedal and receiver Brake Connecting the racing wheel To connect the racing wheel: Plug the receiver into the USB port #1 on the PS3 console, then turn on the console. Accelerator RF-GPS3009 Port LEDs...
Page 6
Open the battery compartment on the bottom of the racing wheel, insert four AA batteries into the compartment, then close the compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. Warning: Make sure that you insert the batteries correctly.
Page 7
Press HOME to select the port the racing wheel is connected to. The corresponding LEDs light. HOME START POWER LEDs LEDs Port Note: If you unplug the racing wheel or restart the PS3 console, you must press HOME again to select the port. RF-GPS3009...
Page 8
Forcing a connection If you have more than one racing wheel connected to the PS3, you may need to force a wheel to connect with the PS3. To force a connection: Connect the receivers to the PS3. 1st wheel Press SELECT and DOWN on the racing wheel at the same time. SELECT START Press FC on the receiver.
Using the racing wheel-advanced features Programming the racing wheel To program the racing wheel: Press and hold SELECT and START for three seconds. The LED turns on. Press the button or move the controller for the item you want to program.
Page 10
Canceling the RY axis function To cancel the RY axis function: Press and hold SELECT and START for three seconds. The LED turns on. Press the foot pedal assigned to the RY axis twice. The LED turns off and the RY axis function is canceled. Adjusting the sensitivity To adjust the sensitivity: Press and hold SELECT and START for three seconds.
FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003. RF-GPS3009...
Product is determined to be defective by an authorized Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you.
Need help?
Do you have a question about the RF-GPS3009 and is the answer not in the manual?
Questions and answers