Protect Your Phone With The Lock Code; Turn On The Phone Lock - Nokia 8260 User Manual

The message Security code changed appears.
If you have changed your security code and don't remember the new code,
contact your service provider. Once you have changed your security code,
the default setting is no longer valid.
• Protect your phone with the
lock code
The lock code enables you to activate and deactivate your phone. When
the lock code is on, you cannot access most of your phone's memory or
menu features. Also, you cannot make phone calls without first entering
the lock code.
When you switch on the lock code, your phone locks after you switch it
off. Then, each time you switch your phone on, it prompts you for a lock
code when you press either
Note: If you enter an incorrect lock code five times in a row, your phone
prompts you for the security code.
The default lock code is 1234. However, Nokia recommends that you
change this code immediately.

Turn on the phone lock

1 Press Menu 4 > 3 > 2 > 1 (Settings > Security settings > Access
codes > Phone lock).
2 Enter the lock code and press
3 Scroll to On and press
When your phone is locked, it might be possible to place a call to the
emergency number programmed into your phone, such as 911 or any other
official emergency number. You can either dial this emergency number or
press the emergency key 9 (if you have activated the 9 key to act as an
emergency key).
8260 User Guide version v. 0.06 [ 67 ]
or .
Names Menu
.
OK
again.
OK
Security
4/21/00