Download  Print this page

Print Button And Status Led - Honeywell PC42t User Manual

Spo – systems support, co-operative online bibliographic system & services.
Hide thumbs

Advertisement

SPO
2.3.3

Print button and Status LED

How to use the Print button
Action
media calibration
move forward
pause
cancel pause
cancel print
Status LED
LED state
turned off
green
green – blinking since
activation
green – blinking
green – fast blinking
orange
orange – blinking
red – blinking
red and green –
alternating
© IZUM, 6. 3. 2018, SPO-NA-EN-316, V1.0
Procedure
If the printer is on, press and hold the
button for two (2) seconds to start the
calibration process.
Press and release the button.
Press and release the button.
Press and release the button.
Press and hold the button for three (3)
seconds.
The printer is turned off.
The printer is in idle mode and ready to print.
The LED blinking green since the printer was turned
on indicates a problem with internal memory.
The printer is starting up.
The printer is paused. If you press the Print button, the
printing will resume. If you hold the button for three
(3) seconds, the printing will be cancelled and deleted.
The printer is receiving data.
The printhead is too hot to print.
The printer is upgrading its firmware from an inserted
USB flash drive. Remove the USB flash drive when
the Status LED turns solid green.
The printer is in Error mode. The printer may be out of
ribbon, or if the ribbon is inserted, the printing
configuration may be incorrect, or the printer may have
run out of labels.
After you have fixed the error, press the Print button to
resume printing.
The printer is severely defected. It needs to be checked
by an authorised repairer.
HONEYWELL PC42t User Guide
Description
The printer prints out several labels and sets
the height of the label.
If the printer is idle, pressing the button will
move the ribbon one label forward.
If you press the button while printing, the
printing will pause.
If printing is paused, pressing the button will
resume printing.
If printing is paused, the commenced printing
is cancelled and the data is deleted from the
printer. The printer then returns into idle
mode.
5/13

Advertisement

   Also See for Honeywell PC42t

   Related Manuals for Honeywell PC42t

Comments to this Manuals

Symbols: 0
Latest comments: