Safety Guidelines - Siemens Milltronics Pointek ULS200 Quick Start Manual

Pointek ULS200 Quick Start Manual
This manual outlines the essential features and functions of Pointek ULS200. We strongly
advise you to acquire the detailed version of the manual so you can use your device to its
fullest potential. The complete manual can be downloaded from the product page of our web
site at: www.siemens.com/pointek. The printed manual is available from your local Siemens
representative.
Copyright Siemens AG 2013.
All Rights Reserved
We encourage users to purchase
authorized bound manuals, or to view
electronic versions as designed and
authored by Siemens Milltronics Process
Instruments. Siemens Milltronics
Process Instruments will not be
responsible for the contents of partial or
whole reproductions of either bound or
electronic versions.
MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments.
Contact SMPI Technical Publications at the
following address:
Technical Publications
Siemens AG
Siemens Milltronics Process Instruments
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com.

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING: relates to a caution symbol on the product, and means that failure to
observe the necessary precautions can result in death, serious injury, and/or
considerable material damage.
1
WARNING : means that failure to observe the necessary precautions can result
in death, serious injury, and/or considerable material damage.
means important information about the product or that part of the operating manual.
Note:
1.
This warning symbol is used when there is no corresponding caution symbol on the product.
A5E32268616
While we have verified the contents of this manual
for agreement with the instrumentation described,
variations remain possible. Thus we cannot
guarantee full agreement. The contents of this
manual are regularly reviewed and corrections are
included in subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
European Authorized Representative
Siemens AG
Industry Sector
76181 Karlsruhe
Deutschland
1
Pointek ULS200 – QUICK START MANUAL
Disclaimer of Liability
Page EN-1