LG 55LX9500 Owner's Manual page 43

Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
1
Select NETWORK.
MENU
2
Select Network Setting.
ENTER
3
Select Wired.
ENTER
If you already set Network Setting:
4
Select Resetting. The new connection
ENTER
settings resets the current network
settings.
5
Select IP Auto Setting or IP Manual
ENTER
Setting.
When Selecting IP Manual Setting:
1 2 3
ABC DEF
4 5 6
IP addresses will need to be input
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
0 manually.
6
Select Enter.
ENTER
Appeared when wired and
wireless are simultaneously
connected.
IP Auto Setting
If you already set the
Network Setting
IP Manual Setting
This feature requires an always-on
broadband internet connection.
You do not need to connect to a PC
to use this function.
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
If the Network Setting is not com-
pleted, network may not operate nor-
mally.
IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you're using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automati-
cally be determined.
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
43