Virtual Reality Hands Free Bluetooth Car Kit MP3/WMA player & FM modulator VRFM9BT Installation And Operation

Dear Customer,
CONGRATULATIONS. The VRFM9BT Hands Free Bluetooth Car Kit MP3/WMA player & FM
modulator, when used as described, will give you years of dependable service in your car, truck,
RV, or mini-van. We have taken numerous measures in quality control to ensure that your prod-
uct arrives in top condition and will perform to your satisfaction. In the rare event that your
VRFM9BT Hands Free Bluetooth Car Kit MP3/WMA player & FM modulator contains a dam-
aged or missing item, does not perform as specified, requires warranty service, or you have an
installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR
TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-445-1797
with a member of our technical service team, or submit your questions by e-mail to custom-
erservice@vr-3.com and a member of our technical service team will respond by e-mail to your
questions. Our in-house technical service team will expedite delivery of your part, advise you
on installation, or help troubleshoot a problem with you. If your product needs warranty service,
our technical service team representative will help you obtain the fastest remedy possible under
the warranty.
Specifi cations
Full Duplex Communication
DSP (Digital Signal Processing) Technology
Bluetooth interface ......................................................................................Version 1.2, Class 2,
Bluetooth frequency range: .............................................................................2.402 ~ 2.480GHz
Supported BT Profi les: ........................................................................... HSHF, Headset, A2DP,
Supported File Formats ........................................................................................... MP3 & WMA
FM transmitting range: ........................................................................................ 88.1~108.0MHz
Operating voltage range: ..........................................................................................DC 12V~24V
Current .............................................................................................................................. 2 amps
USB Charger Output Rating: ............................................................................... 5V DC, 500 ma
Support: ............................................................................................................... SD/MMC, USB
Display: .................................................................................................... 1.5"LCD, 128*128 pixel
Audio In: ............................................................................................................................ 3.5mm
Features & Functions
• Bluetooth car kit, compatible with all Bluetooth phones.
• CVC technology to eliminate noise and restrain echo, enjoy crystal clear sound.
• Supports Line-in, USB & SD/MMC,
• Streams music from the phone to the VRFM9BT via Bluetooth.
• Wide LCD display, supports full frequency transmitting (88.1-108.0Hz)
• EQ Mode and Repeat Mode Options.
• Supports Last Number Re-Dial and Voice Dialing
• Mute function for Private Conversations.
• Automatic Re-Connection.
• Built-in Microphone.
Microphone
LCD Screen
Auxiliary Input
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
VRFM9BT Installation & Operation
INSTALLATION
1. Insert the VRFM9BT into the vehicle's 12 Volt cigarette lighter socket or 12 Volt power outlet.
2. Adjust the VRFM9BT's transmitting frequency to an FM channel between 88.1~108.0MHz that
is not being used by any local radio stations.
3. Set your vehicle's FM radio to the same channel as the VRFM9BT.
4. The VRFM9BT is now ready to be paired with a Bluetooth enabled cell phone, transmit music
played from a USB or SD/MMC memory or other audio source through the line-in.
BLUETOOTH
The VRFM9BT will not enable your cell phone to have features it does not already have. For ex-
ample: If your cell phone does not support A2DP music streaming, then pairing your cell phone
with the VRFM9BT will not enable your phone to stream music. See your cell phone's manual to
and ask to speak
see your cell phone's built-in Bluetooth features.
Pairing the VRFM9BT with a Bluetooth enabled cell phone
Turn your cell phone's Bluetooth Function ON.
1. Insert the VRFM9BT into the vehicle's 12 Volt cigarette lighter socket
or 12 Volt power outlet. If your cell phone receives a pairing request
from the VRFM9BT, then skip step 2 and go to step 3.
2. Press and hold the PLAY button on the control panel or on the remote
control for 3 seconds, "Pairing" will be displayed on the screen indicat-
ing that the unit is ready to be paired.
3. Follow your cell phone's instructions for searching for a new device and pairing, when asked
select "VRFM9BT" from the list of device's, then enter the passcode "0000" and confirm.
If you are using a "dongle" type Bluetooth adaptor; follow the manufacturer's instruc-
tions for that device.
4. If pairing is successful, then "Pair OK" will be displayed the screen of VRFM9BT, and the
Bluetooth icon will be shown on the screen.
USB PORT & SD/MMC SLOT
The USB port and SD/MMC card slot are used to play MP3
and WMA files from USB memory and SD/MC cards that
are not protected by Digital Rights Management(DRM).
The USB port can also be used to charge most electronic
devices that uses a USB cable for charging.
CONTROL PANEL
EQ Button
PLAY/PAUSE/PAIRING BUTTON
Pairing – Press and hold for
3 seconds, "Pairing" is dis-
played on the screen.
Answer a Call – Press once to
answer a call.
Play – Press once to play
the music under the playing
mode.
Pause – Press once to pause
the music.
RED Button
(Re-dial)
B+ / A- BUTTONS
The B+ and A- buttons
change the FM frequency
while in USB/SD/MMC or Aux
Control Panel
In mode, or they change the
folder your music is played
from.
Change the Frequency
Press "B+" to advance to the
next frequency.
Press "A-" to go to the previ-
USB Port and
ous frequency.
SD/MMC Card Slot
(Not Shown)
Change the Folder
Press and hold the "B+" to
change to the next folder.
Press and hold the "A-" to
change to last folder or next
folder.
Blue Tooth
Pa i r i n g
USB Port
SD/MMC Card Slot
/ PREVIOUS & NEXT BUTTONS
Change the Song
Press the button to change
to previous song.
Press the button to change
to next song.
Change the Volume
Press and hold the button
to lower the volume.
Press and hold the button to raise the
volume.
RED Button (Re-dial)
(VRFM9BT must be paired with a Bluetooth
cell phone)
Last Number Re-dial
Press and hold the RED button to re-dial the
last number dialed out.
End or Reject a Call
Press and hold the RED button to end or re-
ject an incoming call.
Transfer a Call
While speaking on the cell phone, press the
RED button to transfer the call from the cell
phone to the VFM9BT.
Remote Control
CH Button
EQ Button
Call Switch
Play/Pause
Answer/Pairing
Previous Track &
Volume Down
Number Buttons
EQ Button to enter Pairing Mode, and "Pairing" is dis-
Changes the EQ Pre-set or the repeat mode. played on the screen.
Change EQ mode
Answer a Call
Press the EQ button to change the EQ mode
Press the
as follows: Normal > Rock > Pop > Classi-
speaking mode.
cal> Live.
Change Repeat mode
& Previous & Next Buttons
Press and hold the EQ button to change the
Changes the track or volume
Repeat mode: ALL > SINGLE > FOLDER >
To change the track
NORMAL > RANDOM.
Press the button to change to the previous track.
Press the button to change to the next track.
CH Button
To adjust the volume
Press the CH button while in playback mode
Press and hold the
to change the frequency the unit is tranmit-
volume.
ting on by entering the frequency with the
Press and hold the
number buttons of the remote control, or with
volume.
the CH+/CH- buttons.
Red Button
CH+ / CH- Buttons
VRFM9BT must be paired with a Bluetooth
The CH+/CH- buttons change the FM fre-
cell phone.
quency or the file folder.
Last number re-dial
To change the FM frequency Press and hold the Red button to re-dial the
last number dialed out.
Press "CH+" to advance to the next frequency.
Press "CH-" to go to the previous frequency. End or reject a call – Press and hold the Red
button to end or reject a call.
To change the Folder
Press and hold the CH+ button to change to Call Switch Button
the next folder. To transfer a call from the VRFM9BT to your
Press and hold the CH- button to change to cell phone.
the previous folder. Press the Call Switch button once to trans-
fer the call between VRFM9BT and your cell
Microphone Mute Button
phone.
Mutes the VRFM9BT's microphone when you
are talking on the phone. Voice Dialing Button
Press the Mute button once to mute the mi- Your cell phone must support Voice Dialing.
crophone, press it again to return to normal Press the Red button to enable your phones
operation. Voice Commands for Voice Dialing.
Number Buttons
Play Button
Use the Number buttons to enter the FM
Play / Pause / Answer / Pairing
channels.
Press the CH button, then enter the number
In Playback mode
for the frequency the VRFM9BT to transmit
Press the button to start.
on.
Press the button to pause playback.
In Bluetooth Mode
Pairing
Press and hold the button for 3 seconds
GIVE US A CALL, WE'LL HELP YOU INSTALL.
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
1-800-445-1797
Microphone (MIC) Mute
CH+ / Next Folder
Voice Dial
Next Track & Volume Up
RED Button
(re-dial)
CH- / Previous Folder
button to answer a call under
button to decrease the
button to increase the