Use the rotary switch and DIP switches of each unit to specify its UNIT ID.
Connect a PoE network switch that can work with Dante within the Dante network,
and use an Ethernet cable to connect the PGM1 to the network switch. If the network
switch does not support PoE, connect a PoE injector between the network switch
and the PGM1.
In some cases, the PSE (PoE network switch or PoE injector) might have ports that supply
power and ports that do not supply power. Connect the PGM1 to a port that supplies
power. For details on how to synchronize each device, refer to "MTX-MRX Editor User
With the PGM1 and the PSE connected, power-on the PSE.
Connections for a small system
Connections for a large system
Connecting the PGM1 to an MTX/MRX system
Maximum 100 meters
PGM1/PGX1 Installation Manual