Photo Key chain
USB Cable
Photo Viewer Ver 2.4 CD
PhotoViewer Browser
The PhotoViewer browser is divided in half.
The computer's window is on the left side, and
the VKC140's window is on the right side.
Each Window has its own icons for performing
functions related to it.
If the VKC140 is disconnected from the com-
puter, then re-connected, the software must be
re-started.
Charging The Battery
The battery will have a nominal charge from the factory. We recommend fully charging
the unit before use.
1. To charge the unit's battery, insert the supplied USB cable into your computers USB
port, then insert the other end into the port on the side of the VKC140. The VKC140 will
display the photos that are stored on it while charging.
The battery takes about 3.5 hours to charge. The battery will last up to 5 hours on a single
charge.
2. After the battery is charged disconnect the unit.
3. Press the power button once to access the menu.
3. Use the Up & Down button to navigate the menu to Power OFF, then press the Power/
Select button once to shut the unit off.
Main Menu
USB Charge
USB Connect
Fig. 6
Computer
VKC140
Power OFF
Delete Image
Display Mode
Clock Set
Clock Display
Language
Exit
Fig. 1
Auto Slide
Manual Slide
Fig. 2
Auto Slide Time
05
Seconds
Fig. 3
2007-08-07
14:21:07
Saturday
Fig. 4
GIVE US A CALL, WE'LL HELP YOU INSTALL.
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
1-800-445-1797
Need help?
Do you have a question about the Digital Photo Key chain VKC140 and is the answer not in the manual?
Questions and answers
i have the device connected and open the program but it just tells me no photo viewer found
To resolve the "no photo viewer found" error on the VKC140 Digital Photo Key chain, follow these steps:
1. Disconnect the VKC140 from the computer.
2. Reconnect the VKC140 to the computer using the supplied USB cable.
3. Restart the Photo Viewer software.
This ensures the software recognizes the device properly after reconnection.
This answer is automatically generated