Samsung RF28NH Series User Manual page 24

Installation
Detach the FlexZone™ drawer
24 English
Untitled-3 24
1. Lift up to remove the FlexZone™ basket.
2. Remove the wire cover along with the
connector harness using a flat-head
screwdriver.
3. Press the locking tab to disconnect the
wire connector.
CAUTION
When relocking the tab, make sure to fully
connect the wire connector. Otherwise, the
FlexZone™ will not operate.
4. Remove the hex-head bolt on each side
of the drawer using a 10 mm socket
wrench.
2018-04-10 12:31:26