Download  Print this page

Output Patching - Yamaha PM5D-RH Quick Start Manual

Hide thumbs


Output patching.

Output patch for the main XLR outputs on the back of the console (MIX 1-24, CUE, MONITOR, MATRIX 1-8, etc)
are currently fi xed and cannot be repatched. However, new fi rmware due for release in Summer 2007 will allow the
repatching of these sockets and they will be added to the menu of the output patch page for MY SLOT patching, two
track outputs and the internal FX inputs. We will look at FX patching separately.
To make a stereo output mix;
Simply press and hold the two [SEL] keys and the mix
will become stereo; the [PAIR] light will come on. The
left encoder will become balance and the right level. The
[MIX SEND] and [MIX MASTER] keys must be in the
(pink) MIX master position.
Planning your outputs;
Only odd / even pairs can be linked to make stereo mixes so if
you use stereo outputs plan the mixes accordingly.
Output naming;
Names can be added on the OUTPUT PATCH menu by
clicking in the grey boxes, just like the INPUT PATCH
menu. Named outputs appear on the console if outputs
are assigned to the assignable / DCA faders. (They are
assigned to D, E and F by default) Names also appear and
are very useful in Studio Manager.
PM5D / PM5D-RH Quick Start Guide Part 1
Continue to next page...


Table of Contents

   Also See for Yamaha PM5D-RH

   Related Manuals for Yamaha PM5D-RH

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: