Download  Print this page

Routing Cables (Ergonomic Stand); Routing Cables (Compact Stand) - HP 9015 Hardware Reference Manual

Retail system
Hide thumbs

Advertisement

Routing cables (ergonomic stand)

1.
Shut down the computer properly through the operating system, then turn off any external devices.
2.
Disconnect the power cord from the power outlet.
CAUTION:
the system is plugged into an active AC outlet. You must disconnect the power cord and wait
approximately 30 seconds for the power to drain to avoid damage to the internal components of the
computer.
3.
Connect the cables to the appropriate rear connectors.
NOTE:
4.
Route the cables from the connectors on the rear panel through the cable retainer on the neck of the
stand (1), and then through the hole in the center of the base and out the underside of the base (2).
5.
Reconnect the power cord and press the power button.

Routing cables (compact stand)

1.
Shut down the computer properly through the operating system, then turn off any external devices.
2.
Disconnect the power cord from the power outlet.
CAUTION:
the system is plugged into an active AC outlet. You must disconnect the power cord and wait
approximately 30 seconds for the power to drain to avoid damage to the internal components of the
computer.
3.
Connect the cables to the appropriate rear connectors.
NOTE:
4.
Snap off the cable routing cover on the neck of the stand (1).
5.
Route the cables from the connectors on the rear panel down the neck of the stand, and then through
the hole in the center of the base and out the underside of the base (2).
Regardless of the power-on state, voltage is always present on the system board as long as
Tilt the display head back for easy access to the rear connectors.
Regardless of the power-on state, voltage is always present on the system board as long as
Tilt the display head back for easy access to the rear connectors.
Routing cables (ergonomic stand)
9

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for HP 9015

This manual is also suitable for:

Rp9 g19018