Table of Contents
Advertisement
Fitting Instructions
1. Place the cooking unit on the working surface with the glass ceramics surface
facing downwards.
2. Remove the covers from the mains connections on the underside of the device;
the terminals for the main line should now be visible. Attach the connecting cable,
using a length of approx. 900 mm, and link to the mains socket.
Check the effectiveness of the earth-contract connection (Illustration 2).
3. Place the cooking unit in the cutout (Illustration 3).
4. Secure the cooking unit in the work-top cutout by means of the tensioning elements
(Illustration Q3).
5. Fit the protective foor.
6. Excessive length of mains cable should be stowed in the area of the cupboard
base unit and kept clear of the floor of the cooking unit.
This device corresponds to type "Y", as regards protection against fire hazards!
Devices of this type only may be fitted next to high cupboards on one side.
"CE of this device corresponds to the following EC guidelines:
- 72/23/EEC from 12.2.1973 - Low Voltage Guidelines
- 89/336/EEC from 3.5.1989 (including Guideline Amendment 92/31/EEC)
- EMV Guidelines"
Warning!
Assurance that no live parts or wires are exposed to contact can only be given
for the unit when fully fitted. Fuses and the main switch should not be activated
until after the device has been fitted. The device must be fitted as an in-built unit
in accordance with these Installation Directives and Instructions for Use.
Please take notice of the fact that we accept no liability for direct or indirect
damage due to incorrect connection or to improper fitment. Before repairs are
undertaken be sure to disconnect the device from its power supply.
2 0
Advertisement
Table of Contents
