The following product are available for this equipment.
Refer to the table given below to choose suitable manuals.
D/A converter module type A1S68DAV/DAI User's Manual
COMPLIANCE WITH EMC AND LOW VOLTAGE DIRECTIVES
(1) Method of ensuring compliance
To ensure that Mitsubishi programmable controllers maintain EMC and Low Voltage
Directives when incorporated into other machinery or equipment, certain measures
may be necessary. Please refer to one of the following manuals.
User's manual for the CPU module used
User's manual (hardware) for the CPU module or base unit used
The CE mark on the side of the programmable controller indicates compliance with
EMC and Low Voltage Directives.
(2) Additional measures
No additional measures are necessary for the compliance of this product with EMC
and Low Voltage Directives.
1. General Description
This manual gives the specifications and handling instructions for the A1S68DAV digital
to analog converter module (hereafter called the "A1S68DAV") and the A1S68DAI digital
to analog current converter module (hereafter called the "A1S68DAI"), which are used in
combination with a MELSEC A series compact building block type PLC CPU (hereafter
called the "PLC CPU")
A1S68DAV is used to convert incoming digital values (16-bit signed binary data) which
are set with the PLC CPU to analog values (voltage outputs ranging from -10V to 10V).
A1S68DAI is used to convert incoming digital values (16-bit signed binary data) which
are set with the PLC CPU to analog values (voltage output ranging from 4mA to 20mA).
A1S68DAV and A1S68DAI are referred to as "A1S68DAV/DAI" or "module" in this
1.1 Related manuals
The following manuals given the specifications, handling, and programming method for
A1S68DAV/DAI User's Manual (IB-66587)
About the Manuals