Download  Print this page

Supported Poweredge Systems; Supported Physical Disks - Dell PowerEdge S130 User Manual

Hide thumbs

Advertisement

Microsoft Windows Server 2008 R2 SP1 (64-bit)
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
NOTE: While you install the Windows Server 2012 operating system, ensure that you install the hot fix update
available at support.microsoft.com/kb/2789962.
RHEL 7.3
SLES 11 SP4
SLES 12 SP2
NOTE: The S130 controller supports only RHEL 7.3, SLES 11 SP4, and SLES 12 SP1. The Linux installer fails to detect
the virtual disks if the RHEL 7.1 or earlier, SLES 11 SP3 or earlier.
NOTE: For the latest list of supported operating systems and driver installation instructions, see the system
documentation at dell.com/operatingsystemmanuals. For specific operating system service pack requirements, see
the Drivers and Downloads section at dell.com/support/manuals.

Supported PowerEdge systems

The following PowerEdge systems support S130 controller:
Dell PowerEdge R730
Dell PowerEdge T630
Dell PowerEdge R630
Dell PowerEdge R530
Dell PowerEdge T430
Dell PowerEdge R430
Dell PowerEdge C4130
Dell PowerEdge M630 (for M1000e enclosure)
Dell PowerEdge M630 (for VRTX enclosure)
Dell PowerEdge FC630
Dell PowerEdge M830 (for M1000e enclosure)
Dell PowerEdge M830 (for VRTX enclosure)
Dell PowerEdge FC830
Dell PowerEdge FC430
Dell PowerEdge R330
Dell PowerEdge R230
Dell PowerEdge T330
Dell PowerEdge T130

Supported physical disks

The PERC S130 controller supports the following physical disk types:
SATA Hard Disk Drive (HDD)
SATA Solid State Drive (SSD)
NOTE: Mixing drives of different speeds (7,200 rpm, 10,000 rpm, or 15,000 rpm) and bandwidth (3 Gbps or 6 Gbps)
while maintaining the same drive type (SATA) and technology (HDD or SSD), is supported.
8

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Perc s130