Table of Contents
Advertisement
Quick Links
Your adhesive/caulk gun has been engineered and manufactured to our high standards for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18 VOLT/24 VOLT MaxSelect
ADHESIVE/CAULK GUN
R8804
BATTERIES AND CHARGERS
SOLD SEPARATELY
NEW LITHIUM-ION BATTERY PACKS
MUST BE CHARGED BEFORE FIRST USE
1
™
Advertisement
Table of Contents
Related Manuals for RIDGID R8804
Summary of Contents for RIDGID R8804
- Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product. SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction ...2 General Safety Rules ... 3-4 Specific Safety Rules ...4 Safety Rules for Charger ...5 Symbols ... 6-7 Features ... 8-9 Assembly ...9 Operation ... 10-17 Maintenance ...18 ... -
Page 3: General Safety Rules
When operating a power tool outdoors, use an exten- sion cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. Use battery only with charger listed. MODEL BATTERY PACK R8804 (18V) 130254007 (24V) 130377001 (R85008) PERSONAL SAFETY ... -
Page 4: Specific Safety Rules
GENERAL SAFETY RULES Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. -
Page 5: Safety Rules For Charger
CAUTION: To reduce the risk of injury, charge only RIDGID lithium-ion batteries on the RIDGID lithium ion charger and RIDGID nickel-cadmium batteries on RIDGID nickel-cadmium chargers. These batteries and chargers are not interchangeable. Other types of batteries may burst, causing personal injury or damage. -
Page 6: Symbols
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current... -
Page 7: Symbols
If you do not understand the warnings and instruc- tions in the operator’s manual, do not use this product. Call RIDGID customer service for assis- tance. -
Page 8: Features
FEATURES PRODUCT SPECIFICATIONS Motor ...18 Volt / 24 Volt DC Charger Input ... 120 V, 60 Hz, AC only Capacity ... 10 oz. and 30 oz. tubes PISTON PLUNGER ROD PUNCTURE TOOL JOIST FOLLOWER PLUNGER ROD RELEASE TRIGGER SWITCH TRIGGER CARRIAGE FRAME PLUNGER... -
Page 9: Assembly
FEATURES KNOW YOUR ADHESIVE/CAULK GUN See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. -
Page 10: Operation
Charge in a well ventilated area. Do not block charger vents. Keep them clear to allow proper ventilation. NOTE: Charge only RIDGID lithium-ion batteries on the RIDGID lithium-ion charger and RIDGID nickel-cadmium batteries on RIDGID nickel-cadmium chargers. These batteries and chargers are not interchangeable. -
Page 11: Cold Weather Operation
OPERATION TO CHARGE A fully discharged battery pack with a temperature between 32°F (0°C) and 150°F (65°C) will charge in about an hour. Charge the 24 Volt lithium-ion battery pack only with the charger provided. Connect the charger to a power supply. NOTE: If needed, the charger can operate with most... - Page 12 • If a different battery charges normally, dispose of the defective pack (see Maintenance section). • If a different battery also indicates “Defective,” the charger may be defective. THE FOLLOWING INSTRUCTIONS ARE FOR RIDGID NICKEL-CADMIUM BATTERY PACKS AND CHARGERS. Battery packs for this tool are shipped in a low charge condition to prevent possible problems.
- Page 13 OPERATION LED FUNCTION OF RIDGID NICKEL-CADMIUM CHARGERS See Figure 5. INDICATOR Power Evaluate Evaluate Evaluate Defective • If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a second time, try charging a different battery.
- Page 14 OPERATION LOCKING THE SWITCH TRIGGER See Figure 6. The switch trigger of the caulk gun can be locked off using the slide switch located below the switch trigger. To lock the switch trigger, slide the switch lock up. This will prevent the caulk gun switch trigger from being depressed.
- Page 15 OPERATION ADJUSTING THE VARIABLE SPEED See Figure 8. The trigger pressure, speed selection, material type, tem- perature, and nozzle diameter will all affect the material flow rate. When using a tube or pack with a smaller diameter nozzle, use a slower speed rate or the material could be forced around the seal at the rear of the tube.
- Page 16 OPERATION INSTALLING THE JOIST FOLLOWER See Figure 11. Hold and lightly squeeze the open end of the joist follower in one hand. Insert the closed end of the joist follower into the opening located beneath the end of the carriage frame. Make sure it is completely seated to the raised notches on the joist follower.
- Page 17 OPERATION APPLYING CAULK See Figure 13. Prepare the surface by removing any dust, dirt, or remnants of old caulk. Make sure the area is clean and dry. Set the speed of the caulk gun to match your application needs.
-
Page 18: Maintenance
Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a RIDGID authorized service center. BATTERIES This tool will accept 24V lithium-ion batteries or 18V nickel cadmium batteries. -
Page 19: Warranty
2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications should be directed to One World Technologies, Inc., attn: RIDGID Hand Held and Stationary Power Tool Technical Service at (toll free) 1-866-539-1710. -
Page 20: Customer Service Information
R8804 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.