Table of Contents
Advertisement
Quick Links
Your dual port charger has been engineered and manufactured to our high standards for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
DUAL PORT BATTERY CHARGER
140276004
1
Fits all RIDGID
slide battery packs
Advertisement
Table of Contents
Related Manuals for RIDGID 140276004
Summary of Contents for RIDGID 140276004
- Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product. SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL...
-
Page 2: Important Safety Instructions
SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for battery charger 140276004. Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product using battery. CAUTION: To reduce the risk of injury, charge only nickel-cadmium rechargeable batteries. -
Page 3: Product Specifications
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Wet Conditions Alert Read The Operator’s Manual Eye Protection Safety Alert FEATURES... -
Page 4: Operation
OPERATION APPLICATIONS You may use this tool for the following purposes: Charging 9.6 Volt, 12 Volt, 14.4 Volt, and 18 Volt RIDGID slide batteries CAUTION: If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. - Page 5 OPERATION LED FUNCTION OF CHARGER See Figure 3. INDICATOR Power Evaluate Evaluate Evaluate Defective • If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a second time, try charging a different battery. •...
-
Page 6: General Maintenance
Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a RIDGID authorized service center. KEEPING THE CHARGER VENTS CLEAN The fan in this charger will perform more efficiently if the air vents and ports are kept clean and dust-free. -
Page 7: Warranty
2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications should be directed to One World Technologies, Inc., attn: RIDGID Hand Held and Stationary Power Tool Technical Service at (toll free) 1-866-539-1710. - Page 8 140276004 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.
Need help?
Do you have a question about the 140276004 and is the answer not in the manual?
Questions and answers
Red flashes at all times green lighht never comes on that side
If the RIDGID tool with part number 140276004 has a flashing red LED and the green LED is off, it indicates one of the following conditions:
- The battery pack is too hot or too cold, and charging will start automatically once it reaches the correct temperature.
- The battery pack is deeply discharged, and the charger is pre-charging it until it reaches normal voltage before starting fast charge mode.
- If both LEDs flash simultaneously, the battery pack or charger is defective. If this happens, try removing and reinstalling the battery pack to see if the condition repeats.
This answer is automatically generated
One side dosnt charge at all, why?
The RIDGID part number 140276004 may not charge on one side due to several reasons:
1. Hot or Cold Battery Pack – If the battery is too hot or too cold, the charger will not start the charging process until the battery reaches a normal temperature.
2. Deeply Discharged Battery – If the battery is deeply discharged, the charger will pre-charge it until it reaches normal voltage before beginning fast charge mode.
3. Defective Battery Pack or Charger – If both the red and green LEDs flash simultaneously, either the battery pack or the charger is defective. Try removing and reinserting the battery. If the issue repeats, the component may need replacement.
4. Dirty or Blocked Charger Vents – Dust or debris in the charger’s air vents may affect its performance. Cleaning the vents could improve charging efficiency.
If the issue persists, the defective part should be replaced or serviced at a RIDGID authorized service center.
This answer is automatically generated