Using Your Direct Prep - Kenwood CCL45 Instructions Manual

Hide thumbs Also See for CCL45:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
important
The tower can only be rotated in a
clockwise direction. Do not attempt to
force it in an anti-clockwise direction
as this may damage the tower.
If the food is not exiting the food
outlet, switch off and check that food
is not clogging under the disc and
the slinger plate is fitted. Clear any
trapped food before continuing to
process.
When not in use remove the Direct
Prep and replace the outlet cover.
hints & tips
Always use fresh food.
Do not cut food up too small. Fill the width of the
feed tube fairly full. This prevents the food from
slipping sideways during processing.
There will always be a small amount of waste left
on the disc after processing.
When grating food placed upright will come out
shorter than food placed horizontally.
When using the Direct Prep to slice or grate directly
into the bowl, the lid adapter
guide ingredients.
1 Remove the filler cap.
2 Align the Direct Prep to position
3 Place the adapter over the lid filler cap opening
with the handle positioned to the left.
4 Turn the Direct Prep to position
5 Use the Direct Prep as described in the "using your
direct prep" section.
important
Always hold the lid adapter by the finger grip
when removing or fitting it.
The adapter must be removed before fitting the
filler cap.
can be used to
.
.
11

Advertisement

Table of Contents
loading

Table of Contents