Creating Disk Slots And Assigning Ownership - Cisco UCS S3260 Manual

Creating Disk Slots and Assigning Ownership

Step 2
Step 3
Example
The following example creates the dzp1 disk zoning policy:
UCS-A# scope org
UCS-A /org # create disk-zoning-policy dzp1
UCS-A /org/disk-zoning-policy*# commit-buffer
UCS-A /org/disk-zoning-policy#
Creating Disk Slots and Assigning Ownership
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco UCS S3260 System Storage Management
10
Command or Action
UCS-A org/ # create disk-zoning-policy
diskzoning policy-name
UCS-A /org/disk-zoning-policy* #
commit-buffer
Command or Action
UCS-A# scope org org-name
UCS-A org/ # disk-zoning-policy
disk-zoning-policy-name
UCS-A org/disk-zoning-policy # create
disk-slot slot-id
UCS-A org/disk-zoning-policy/disk-slot* # set
ownership ownership-type
{chassis-global-host-spare\dedicated\shared\unassigned}
Cisco UCS S3260 System Storage Management
Purpose
Creates a disk zoning policy name with the
specified disk zoning policy name.
Commits the transaction to the system
configuration.
Purpose
Enters organization mode for the specified
organization. To enter the root organization
mode, type / as the org-name .
Enters the disk zoning policy.
Creates disk slot with the specified slot number.
Specifies the disk ownership to be one of the
following:
• chassis-global-hot-spare—Chassis Global
Hot Spare
• dedicated—Dedicated
• shared—Shared
Note Shared mode cannot be used
under certain conditions when
dual HBA controllers are used.
To view the conditions for
Shared mode for Dual HBA
controller, see
Limitations for Shared Mode
for Dual HBA Controller, on
page 11.
Table 3: