When Copying Onto Ohp Transparencies - Ricoh aficio 1013F Operating Instructions Manual

Copying
Note
❒ Set the direction of the copy pa-
per to L.
❒ Swing out the extender to sup-
port paper sizes larger than
A4L, 8
❒ Fan paper to get air between the
2
sheets and avoid a multi-sheet
feed.
Reference
For details about how to set the
copy paper, see p.28 "When
copying onto OHP transparen-
cies", p.29 "When copying onto
standard size pap er ", p.29
"When copying onto custom
size copy paper" or p.30 "When
copying onto envelopes".
D D D D
Push down the paper guide re-
lease lever.
Note
❒ If you set A4, 8
er copy paper, hold the edge of
the paper and push down the
paper guide release lever.
❒ If you do not push down the pa-
per guide release lever, a mis-
feed might occur.
❒ You can specify the type of pa-
per used for the bypass tray. See
"6. Bypass Paper Type" in p.56
"Copier Features"
E E E E
Place your originals, and then
press the { { { { Start} } } } key.
28
" × 14"L.
1
/
2
" × 14" or larg-
1
/
2
When copying onto OHP
transparencies
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to display
"3. Copier Features", and then
press the { { { { OK} } } } key.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key to display
"6. Bypass Paper Type", and then
press the { { { { OK} } } } key.
D D D D
Press the 0 0 0 0 or 1 1 1 1 key to display
"Special/OHP", and then press
the { { { { OK} } } } key.
E E E E
Press the { { { { User Tools/Counter} } } } key
to exit from the user tools.