Milestone Husky M50 Quick Start Manual

Hide thumbs Also See for Husky M50:

See also: Administrator's Manual

Conﬁguration Steps

Follow the steps outlined below to set up your network and ensure your cameras are added to the system.

To conﬁgure cameras, please follow the conﬁguration instructions provided by the manufacturer of your

speciﬁc camera.

For optimal performance connect the camera network to one of the LAN ports and the viewing network

to the other LAN port. See diagrams below:

HDMI

IP cameras

To use the VGA port, you must attach the provided adapter.

Conﬁgure your LAN ports to use the same addressing scheme (DHCP or static addressing) as your camera network

and viewing network.

Launch the Milestone Husky Management Application from the desktop to begin adding and conﬁguring your cameras.

For additional information, please see the documentation under the Management Application Help menu.

Click on Add Hardware

M30 & M50 QUICK START GUIDE

DVI/VGA

LAN Ports

Camera

network

switch

Management/viewing

network

switch

Viewing client station

Table of Contents

Need help?

Do you have a question about the Husky M50 and is the answer not in the manual?

Page 1 Conﬁgure your LAN ports to use the same addressing scheme (DHCP or static addressing) as your camera network and viewing network. Launch the Milestone Husky Management Application from the desktop to begin adding and conﬁguring your cameras. For additional information, please see the documentation under the Management Application Help menu.
Page 2 Click on Scan for hardware Click Next Select All Manufacturers or select the camera manufacturers you have to speed the discovery process.
Page 3 After scanning, select the devices you want to add, making sure that the correct username and password is entered where appropriate, then click Next. When complete, click OK. Save your conﬁguration.
Page 4 Milestone products are sold through authorized Milestone Husky is only available in the US and Canada Milestone Husky is a registered trademark of Milestone Systems www.milestonesys.com © 2013 Milestone Systems. All rights reserved.

Husky m30