Display Assembly - HP Pavilion X360 14M Maintenance And Service Manual

Display assembly

NOTE: The display assembly is spared only as an entire hinge-up. Display subcomponents are not spared.
Description
Display assembly, FHD, BrightView with HD camera, mineral silver
Display assembly, FHD panel, BrightView, IR camera, natural silver
Display assembly, FHD panel, BrightView, HD camera, natural silver
Display assembly, HD panel, anti glare, HD camera, natural silver
Display assembly, FHD panel, BrightView, IR camera, pale gold
Display assembly, FHD panel, BrightView, HD camera, pale gold
Display assembly, HD panel, anti glare, HD camera, pale gold
Display assembly, FHD panel, BrightView, IR camera, sapphire blue
Display assembly, FHD panel, BrightView, HD camera, sapphire blue
Display assembly, HD panel, anti glare, HD camera, sapphire blue
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the display assembly:
1. Disconnect the antenna cables from WLAN module (1).
2. Disconnect the camera (CCD) cable from the system board ZIF connector (2).
3. Disconnect the display cable from the system board ZIF connector (3).
4. Remove the camera cable and antenna cable from the clips in the left speaker (4).
Bottom cover on page
Battery on page 33).
31).
Component replacement procedures
Spare part number
L18192-001
L20551-001
L20552-001
L20553-001
L20554-001
L20555-001
L20556-001
L20557-001
L20558-001
L20559-001
49