Camera, World-Facing - HP Pavilion X360 14M Maintenance And Service Manual

Camera, world-facing

Description
Camera, world-facing
Before removing the camera, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the speakers (see
Remove the camera:
1. Remove the gasket from the top of the bracket (1).
2. Remove the Phillips M2.0×3.0 screw (2) that secures the bracket to the computer.
3. Remove the bracket from on top of the camera module (3).
4. Disconnect the cable from the ZIF connector on the system board (4).
5. Remove the camera module from the computer (5).
Reverse this procedure to install the camera.
48 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 33).
Speakers on page 47).
31).
Spare part number
L18181-001