Rheem GN Specifications

Power Vent Kits
Power Venter (from Tjernlund)
Vent Terminal
Not for use with GN, GP or GX models.
For technical assistance, please call the Tjernlund Help Line at
*
for Gas Commercial Water Heaters
1-800-255-4208
Manufactured by Tjernlund Products, * Rheem-Ruud
commercial gas water heater power vent kits are
your best choice for new construction, electric-to-gas
conversions and renovations.
Construction Features:
• Certified for use on natural and propane gas
models.
• Maximum venting length up to 50 feet equivalent
including the vent terminal.
• Vent terminal can be installed through combustible
or non-combustible surfaces – heat shield is
provided.
• Vent terminal is constructed from heavy-duty
corrosion resistant aluminum.
• Venter can be connected to a vent termination
on an exterior wall.
• Vibration isolators are supplied to provide quiet
operation.
• Safety interlocks standard.
• Complete with mounting hardware.
• Venter is pre-wired with 40 feet of #18-4 copper
wire (24 volt) to minimize field connections.
Certifications and Ratings:
• Power vent kits manufactured by Tjernlund Products,
Inc. are tested and certified by AGA for use on
Rheem-Ruud commercial gas heaters.
Continued on reverse.