Download Print this page
Rheem 46000 BTU Specifications
Rheem 46000 BTU Specifications

Rheem 46000 BTU Specifications

Gas commercial water heaters

Advertisement

Quick Links

Glasslined Storage
60 Gallon
Natural Gas
50,000 BTU
60 Gallon
Propane Gas
46,000 BTU
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
Gas Commercial Water Heaters
60 Gallon Tank-Type Models
Rheemglas
®
Glasslined Storage Water Heaters are designed to fill the need
where medium quantities of hot water are required. Typical applications
include large residences, small restaurants, apartments up to 6 units, barber
and beauty shops and small office buildings. These units may be used with
separate storage tank(s). Tested over 76% thermal efficient.
Construction Features:
• Storage tank –
the tank of this water heater is
lined with a durable coating of high
temperature glass. It is built for
long life under any water
conditions.
• CFC free –
foam insulation for maximum heat
retention.
• Gasmaster
burner –
natural gas model.
• Magnesium anode rod
• Tamper resistant brass
drain valve
Certifications and Ratings:
These Rheemglas water heaters are CSA design certified
a) As an automatic circulating tank water heater.
b) For operation at 180°F (82°C).
c) For installation on combustible floors and in alcoves.
Rheemglas water heaters are rated for 150 PSI (1031 kPa) working
pressure, 300 PSI Hydrostatic Pressure.
These models have been tested according to ANSI/CSA Test procedures,
and exceed the performance efficiency and standby loss requirements of
ASHRAE standard 90.1b-2004 requirements for energy conservation.
• New design flue baffle –
greater heat retention.
• Temperature control –
designed to shut off all gas if the
pilot goes out. Thermo-magnetic
automatic pilot – no moving parts
to wear out. Accurate temperature
control.
• Relief valve –
an ASME rated CSA 4.4 approved
temperature and pressure relief
valve is installed on each unit. The
valve is set for 150 PSI (1031 kPa)
pressure and 210°F (99°C)
temperature
.
Continued on reverse.

Advertisement

loading

Summary of Contents for Rheem 46000 BTU

  • Page 1 46,000 BTU • • In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Manufacturing Company • Water Heater Division Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3 Gas Commercial Water Heaters ®...
  • Page 2 This product features a three year limited warranty against tank leaks. Please refer to Commercial Warranty Information brochure for complete warranty information. Rheem Manufacturing Company • Water Heater Division Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3 0 3 / 0 6 W P THERMAL 40°F 50°F...

This manual is also suitable for:

50000 btuGl60-51nGl60-46p