Download  Print this page

RF-Link APW-1000 Quick Install Manual

5.8ghz outdoor rf power amplifier
Hide thumbs
   

Advertisement

RF-Link
www.rflinkusa.com
QUICK INSTALL GUIDE
Model: APW-1000
5.8GHz Outdoor RF Power Amplifier
1. PACKAGE CONTENTS:
Make sure that all units shown as below are enclosed,
please contact your dealer if anything is missing.
1
1. -- APW-1000 Outdoor RF Amplifier *1
2. -- Waterproof Power Cable( 2 m) *1
3. -- Cable (SMA male, 25") *1
4. -- Power adapter (input: 120V DC, 60Hz, 9.7W output: 12V DC, 500mA) *1
2. FUNCTION
1 -- SMA FEMALE ;RF Signal Input
2 -- DC power input ,connect to power supply (12V~28V)
3 -- SMA FEMALE ;RF Signal Output
1
1
Model:APW-1000
Model:APW-1000
RF IN
RF IN
RF OUT
RF OUT
DC IN
DC IN
2
2
2
3
3
3. SETUP GUIDE
1. Connect transmitter antenna to APW-1000 (via "RF OUT).
2. Connect SMA cable to tranmitter (via "RF IN:).
3. Connect Power adapter(120VAC / 12VDC 500mA) to DC JACK
+
DC JACK
4. SPECIFICATION :
Operating frequency range
P1dB
Power gain
Match impedance
Input VSWR
Supply voltage
Supply current
Dimension
Operating temperature
Storage temperature
Waterproof Rate
NOTE:
1. Keep the coaxial cable between the APW-1000 and Transmitter as short as possible.
2. Keep the coaxial cable between the APW-1000 and Antenna as short as possible.
3. Make certain all connections are tight.
4. Make certain all screws has locked on the cover.
RF Singnal from
RF Singnal from
Model: APW-1000
Model: APW-1000
Transmitter
Transmitter
RF IN
RF IN
RF OUT
RF OUT
DC IN
DC IN
5.0---6.0 GHz
26 dBm
18 dB typical
50 Ohm
2:1
+12 ~ +28 VDC
< 380 mA
125 mm * 80 mm * 40 mm
-20 to +65
-40 to +85
IP 65
RF Singnal
RF Singnal
to Antenna
to Antenna

Advertisement

Table of Contents
loading

  Related Manuals for RF-Link APW-1000

No related manuals