Revox Re:sound H190 Specification Sheet

Revox Re:sound H190 Specification Sheet

Revox re:sound speaker specification sheet

Advertisement

Quick Links

Revox Re:sound H190
Tecnical Data

Components

Nominal music power

Frequency response (IEC)

Sensitivity

Nominal impedance

Weight

Dimensions

Product
Re:sound H190 in veneer cherry
Re:sound H190 in silver varnished 1.084.541.00
Dominating Entertainment.
Revox of Switzerland.
Re:sound H190 – „forward to the roots":
With this completely newly developed product, Re:sound H190, Revox
is once again setting new standards in the development of high-
quality speaker systems. The combination between breathtaking
design and the highest audio quality guarantees total listening
pleasure.
Great importance was given to achieving a tonal balance across the
whole transmission range during product development. The
specification also called for a particularly luxurious, dark and dry bass
reproduction, a spatial yet discreet mid-range and silken, generous
treble tones.
A further goal was a high linearity, using the best-possible physical
emission characteristics.
The Re:sound H190 is available in veneer cherry or silver varnished and
manufactured in the Revox factory in Villingen, Southern Germany
and each unit is tested against the most demanding of tolerances, as
part of the company's stringent quality assurance program.
4x154mm woofers, 1x154mm midrange, 25mm tweeter calotte
180 / 220 watts
28 Hz – 40kHz
87dB (1 W / 1m)
4 Ohm
38.5 kg
Housing including pedestal
Housing width
Housing depth
Pedestal measuements (width x depth) 395x295mm
article number
1.084.540.00
1940mm
180mm
250mm
is

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Re:sound H190 and is the answer not in the manual?

Questions and answers

Summary of Contents for Revox Re:sound H190

  • Page 1 A further goal was a high linearity, using the best-possible physical emission characteristics. The Re:sound H190 is available in veneer cherry or silver varnished and manufactured in the Revox factory in Villingen, Southern Germany and each unit is tested against the most demanding of tolerances, as part of the company’s stringent quality assurance program.
  • Page 2 5. Vibration-optimised and internally reinforced housing. The result High-quality speaker connections reduce unwanted contact resistance and other interference to an absolute minimum. Dominating Entertainment. Revox of Switzerland. magnets and durable membranes made of high-strength, black anodised aluminium. Short-circuit rings with internal magnets prevent distortion very effectively.

Table of Contents