Download Print this page

Introduction - Honeywell UDC3200 series Operator's Manual

Universal digital controller
Hide thumbs Also See for UDC3200 series:

Advertisement

1.1 Operator Interface
1.2 Function of Displays and Keys
Upper display with 4 large digits shows
3200
3200
Process Variable value (normal operation)
and special annunciator features. During
Configuration, the upper display provides
guidance for the operator through prompts (7
– characters)
During normal operation, the lower display
SP
SP
shows key-selected operating parameters
such as Output, Setpoints, Inputs, Deviation,
active Tuning Parameter Set, Timer Status, or
minutes remaining in a setpoint ramp (4
digits). During configuration, the lower display
provides guidance for the operator through
prompts (8-characters).
Indicates Alarm 1 and/or Alarm 2 conditions
ALM
ALM
exist.
Indicates Digital Input 1 and/or 2 on.
DI DI
04/08

1 Introduction

Figure 1-1 UDC3200 Operator Interface
Table 1-1 Function of Displays and Keys
Display Indicators
UDC3200 Universal Digital Controller Operator Manual
Indicates Control Relay 1 and/or
OUT
OUT
2 on.
F F
Or
Indicates either degrees
Fahrenheit or Centigrade.
C C
MAN
MAN
Or
Indicates either Manual or Auto
mode.
A A
Indicates Local Setpoint #1.
SP
SP
Also, a bar is lighted when the
setpoint being used is shown on
the lower display.
1

Advertisement

loading