TP-Link HS200 Quick Start Manual

Important Safety Information

Before installing, servicing, or removing the Smart Switch, read and follow all safety precautions
including the following:
• WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at the circuit breaker or
fuse. Use a non-contact voltage tester to ensure the power is off.
• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC)
or your local electrical code. If you are unfamiliar with these codes and requirements, or are
uncomfortable performing the installation, consult a qualified electrician.
• The Smart Switch is an indoor single-pole switch that requires a neutral connection.
• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.
Smart Wi-Fi Light Switch Installation
1 Download TP-LINK Kasa
2 Connect mobile device to your
3 Launch Kasa and follow the wiring steps provided, then connect the
Smart Switch to your home network.
Sketch 9:41 AM 100% Sketch
Welcome
home
Log in to access your devices.
Email
Password
L O G I N
Forgot password?
Create Account Skip
from App Store or Google Play.
OR
scan QR
code
2.4GHz Wi-Fi
9:41 AM 100% Sketch 9:41 AM
Before we start Start the con guration
Have you already wired up your Locate the reset button below the
Smart Switch? switch on the left.
Press and hold for 5 seconds until the
Wi-Fi light blinks amber and green.
RE SET
N O T Y E T
N E X T
Yes, I have

Quick Start Guide

Apple and App Store are trademarks of
Apple Inc., registered in the U.S. and
other countries.
Android and the Google Play logo are
trademarks of Google Inc.
network.
Note: The Smart Switch
only supports 2.4GHz
networks.
100%
7106506280
HS200
REV 1.0.0