Anton Paar DMA 35 Instruction Manual page 21

Symbols on the display
The infrared data transfer symbol is shown on the information header
when data is imported or exported via the IrDA interface.
The RFID symbol is shown on the information header when it is
possible to allocate an RFID tag to a method or sample ID and when an
RFID tag is read while the instrument displays the main screen.
Furthermore, methods and/or sample IDs with an allocated RFID tag
are marked with this symbol when listed.
The battery charge status symbol informs you about the battery charge
status of your instrument. For further information on different charge
status symbols and their meanings, see Chapter 11.1.
The warning sign indicates that a measured value is outside range
specifications. The warning sign is always shown together with an
information (press the right softkey) stating the warning type (for details
about warning types, see Chapter 13).
TIP You can change between the <Info> softkey which is displayed together
with the warning sign and the original softkey configuration by pressing the
arrow keys.
C96IB01
EN
21