Honeywell CT3200 Installation Quick Manual page 2

Programming Quick Guide
Model CT3200
Program the CT3200 Thermostat before or after the thermostat is mounted to the wall.
Simply insert batteries (see Installation Quick Guide) to activate.
Open thermostat cover to access programming buttons and system switches.
Set Current Time and Day
Set
Press once; press Time
Clock/Day
day is displayed. Press
Heating Program
Set System switch to Heat. Press
Repeat for LEAVE, RETURN and SLEEP.
Set
Press until Sat. - Sun. appear in display . Press Time
Schedule
Repeat for SLEEP.
After programming is finished, Press
Cooling Program
Set System switch to Cool. Repeat each step in the Heating Program to set cooling program.
For additional information refer to the Programming and Installation Instructions or contact Honeywell Customer Relations at
www.honeywell.com/yourhome or 1-800-468-1502.
69-1548 6/01 Copyright © 2001 Honeywell
Ahead
until current time is displayed. Press
Back
Set
.
Schedule
Set
Schedule
once. Press Time
Set
.
Schedule
Printed in USA
Set again; press Time
Clock/Day
Ahead
Warmer
and Temp
Back
Cooler
Ahead Warmer
and Temp
Back Cooler
Ahead
until current
Back
to program WAKE for Mon. - Fri.
to program WAKE for Sat. - Sun.