Table of Contents
Advertisement
Appendix B
Menus
This appendix provides information about:
Using the optional SDU with display to access GX2-PSDC10D-R menus
The menu structure
Alarms
Table B-1 identifies the procedure for navigating through the GX2-PSDC10D-R menus using the
optional SDU with display:
Table B-1
GX2-PSDC10D-R menus
To
Scroll to the top-level
power supply menu
Enter a level two menu
from the top-level PS1 or
PS2 menu
Change a parameter
value
Go up from level two to
level one
The following subsections provide the menu structure:
Module Status Menu
The italicized x's in this table indicate a displayed variable:
Parameter
AMBIENT TEMPERATURE:
HEATSINK TEMPERATURE:
BACKPLANE
+12 V:
+5.1 V:
+3.7 V:
Use
Press the up or down arrows to scroll to the PS1 or PS2 menu. If a power supply
is not installed, EMPTY is displayed after the PS1 or PS2.
Press the right arrow. Then press the up and down arrows to scroll to the
MODULE STATUS MENU or the MODULE INFO MENU.
Press the right arrow to enter edit mode.
Use the up and down arrows to change the value.
Press
to save the new value or press the left arrow to exit edit mode without
ENTER
changing the value.
If you press no key for 10 to 15 seconds, you exit edit mode with the value
unchanged.
Press the left arrow.
Value
xx.x °C
xx.x °C
xx.x V
x.x V
x.x V
GX2-PSDC10D-R Installation and Operation Manual
Advertisement
Table of Contents
