Installation - Acer BM320 User Manual

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect HDMI Cable (Only HDMI/MHL-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI/MHL cable to the computer.
1-2 Connect Digital Cable (Only Dual-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor
and connect the other end to the computer's port.
1-3 Connect DP Cable (Default input) (Only DP/Mini-DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP/Mini-DP cable to the computer.
2. Connect the Audio Cable (Optional)
3. Insert the monitor power cable into the power port at the back of the
monitor.
4. Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
5. Select Power-off USB charge ON/OFF to enable/disable Power-off USB
charge function. (Optional)
Note: Adjustment of the volume control as well as the equalizer to
other settings than the center position may increase the ear-/
headphones output voltage and therefore the sound pressure level.
POWER
AC SWITCH POWER AUDIO IN DVI-D IN
optional
AUDIO IN DVI-D IN HDMI (MHL) Mini DP DP
DP
Mini DP
HDMI / MHL
DVI-D IN
HDMI (MHL) Mini DP DP
EN-12