Advertisement
Quick Links
LED WORKING LIGHT WITH MAGNETIC BASE
Thank you for purchasing the LED Working Light With Magnetic Base.
For proper operation, please read this manual thoroughly before use.
PARTS IDENTIFICATION
LED Light
Magnet controlled by
ON/OFF lever for
securing the light to
metal surfaces.
Strong magnetic field is
present. Please keep in
OFF position when not in
use.
Magnet ON/OFF
Control Lever
AC Plug
SPECIFICATIONS
Power: AC100V 50/60Hz
Rated Power: 5W
Protection Fuse: 1A
※Fuse is not customer serviceable
Light Color Temperature: 5500K~6000K
Luminosity: Approx 326lm
Cord Length: Approx. 1m
Magnetic Holding Force: Approx. 600N
Dimensions: Approx W70×H475×D80mm
Weight: Approx 1.6kg
1. Insert the attached Power Plug into a power source.
ON/OFF Switch
2. Press the ON/OFF switch at the rear of the light to turn on
( Rear )
【Rear】
Arm ( Flexible )
Flexible arm
can be easily
positioned.
When moving the light to the
right or left, do not twist the lamp
head on the arm as it may cause
damage.
Rotate the Magnetic Base of the
light to turn.
Keep magnet away from precision instruments, watches, and
magnetic storage media.
Check to insure holding force on surface is sufficient before use.
Magnetic Base
Holding force will be reduced for certain conditions:
・ If surface metal is thin.
・ For surface materials other than mild steel plate.
・ If surface is painted or dirty, or if surface is uneven.
The holding force may not be sufficient to prevent sliding on some
surfaces. For vertical use, pay special attention to make sure
Base will not slide.
On slippery surfaces or vibrating machinery, Base may not hold
as strongly.
Use care when switching ON/OFF magnet. Light may fall if
magnet is switched off without support. To prevent accident,
always support Light when switching magnet Lever ON/OFF.
Do not stare into light for long periods.
Product is NOT waterproof; please do not use in rain or wet
locations. There is risk of electric shock.
Use care not to over-bend the flexible shaft, it may cause
damage.
Keep Magnet Lever in OFF position when not in use.
Light is intended for use in industrial applications, If used in office
or residential environment, please use caution.
OPERATION
power. Press again to turn off.
Please Note
CAUTION
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5670 Fax. : +81-256-39-7730
MAIL intl.sales@niigataseiki.co.jp
URL
http://www.niigataseiki.co.jp
INSTRUCTION MANUAL
Model No.: SB-60LED
Light ON/OFF Switch
I311-K 1610
Advertisement
