Gpo And Pwm Connections - Epson S5U12517P00C100 User Manual

S1D13517 Display Controller

4.6 GPO and PWM Connections

The S1D13517 Display Controller has 4 GPO pins and PWM pin. All the GPO pins and PWM pin are routed to the
CN4 connector. Connector CN4 is 0.1x0.1 inch 10-pin header (5x2).
The following figure shows the location of the GPO and PWM connector, CN4.
CN4
Figure 4-5: GPIO and PWM Connector Location (CN4)
For the pinout of connector CN4, see Chapter 6, "Schematic Diagrams" on page 18.
S5U13517P00C100 Evaluation Board User Manual (Rev. 1.0) EPSON 15