Gas Piping - andrews WHiX49 Installation Manual

Gas water heaters (external)
Hide thumbs Also See for WHiX49:
Table of Contents

Advertisement

8.

Gas Piping

The appliance and its individual shutoff valve must be disconnected from the gas supply piping system
during any pressure testing of that system at test pressures in excess of 35 mbar.
The Appliance must be isolated from the gas supply piping system by closing its individual manual shutoff
valve during any pressure testing of the gas supply piping system at test pressures equal to or less than
35 mbar.
The appliance and its gas connections must be leak tested before placing the appliance in operation.
The inlet gas pressure must be within the range specifi ed. This is for the purposes of input adjustment.
Measuring Gas Pressure
In order to check the gas supply pressure to the unit, a
tap is provided on the gas inlet. Remove the hex head
philips screw from the tap, and connect a manometer
using a silicon tube.
10
Follow the instructions from the gas supplier.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lwhix49Whicx56Lwhicx56Whi49Lwhi49Whic56 ... Show all

Table of Contents