Emerson 1410 A/B Quick Start Manual page 24

Quick Start Guide
Canada
N6 Canada Division 2
Certificate: 2646342 (CSA)
Standards: CAN/CSA C22.2 No. 0-10, CSA C22.2 No. 213-M1987 (R2013),
Markings: Suitable for CL I, DIV 2, GP A, B, C, D
Temperature code: T4 (–40 °C ≤ T
Note
 Shall be powered by a class 2 power supply.
 Suitable for dry indoor locations only.

Equipment must be installed in a suitable tool accessible enclosure subject to the end
use application.
 Using the Emerson 1410D and the 781 Wireless Field Link in a hazardous location
requires barriers between the two units.
Europe
N1 ATEX Type n
Certificate: Baseefa14ATEX0125X
Standards: EN 60079-0: 2012, EN 60079-15: 2010
Markings:
Special Conditions for Safe Use (X):
1. The equipment must be installed in an area of not more than Pollution Degree 2 as
defined in IEC 60664-1, and in an enclosure that provides a degree of protection of at
least IP54 and meets the relevant requirements of EN 60079-0 and EN 60079-15.
2. External connections to the equipment must not be inserted or removed unless either
the area in which the equipment is installed is known to be non-hazardous, or the
circuits connected have been de-energized.
3. The equipment is not capable of withstanding the 500 V electrical strength test as
defined in clause 6.5.1 of EN 60079-15: 2010. This must be taken into account during
installation.
4. When fitted, the surface resistivity of the remote antenna is greater than 1 GΩ. To
avoid electrostatic charge build up, it must not be rubbed with a dry cloth or cleaned
with solvents.
Note
Currently not available for Emerson 1410D option.
International
N7 IECEx Type n
Certificate: IECEx BAS 14.0067X
Standards: IEC 60079-0: 2011, IEC 60079-15: 2010
Markings: Ex nA IIC T4 Gc, T4(-40 °C ≤ T
24
CSA C22.2 No. 61010-1 - 2012, ANSI/ISA-12.12.01 - 2012,
UL61010-1, 3rd Edition
II 3 G Ex nA IIC T4 Gc, T4(–40 °C ≤ T
≤ 70 °C)
a
≤ +75 °C), V
a
≤ +75 °C), V
a
= 30 Vdc
MAX
= 30 Vdc
MAX
May 2018