Download Print this page
TP-Link TL-NC450 Quick Install Manual

TP-Link TL-NC450 Quick Install Manual

Advertisement

Quick Links

Wall Mounting

A) Place the paper drill guide where you want the
camera. Check the alignment using a level.
B) Using a(n) 0.24 inch (6mm) drill bit, drill holes
through the two circles on the guide. Remove the
paper.
C) Insert the two anchors into the holes. Place the
camera mount over the anchor and use the screws
to secure it
D) Attach the camera.

Ceiling Mounting

A) Place the paper drill guide where you want the
camera*
*Camera placement can affect viewing angle. For
best results, place the camera near a wall or
corner.
B) Using a(n) 0.24 inch (6mm) drill bit, drill holes
through the two circles on the guide. Remove the
paper.
C) Attach the camera mount using the screws,
washers, and wingnuts.
D) Attach the camera.
Quick Install Guide
Step One – Connect
Connect the camera and your smartphone
to the same router.
Internet
Smartphone
Wireless Router
WAN
LAN
Camera
Outlet
Camera
Outlet
Passive
POE Injector
System LED
Flashing red: System starting
Solid red: Network not connected
Solid green: Network connected
Get More
More functions with tpCamera
Get notifications when motion is detected,
and view alerts history.
Stay in touch with 2-way audio.
View all of your cameras on one screen by
downloading the TP-LINK Camera Control
utility. See the Camera Control User Guide
for more details. Or visit us online at
for Camera Control utility ,
www.tp-link.com
Firmware, and other support.
1
Drill Holes
1
Drill Holes
Step Two – Register
Download the tpCamera app. Once
installed, open it and follow the
instructions to add the camera to your
TP-LINK Cloud account.
OR
The WPS/Reset Button
WPS (Wi-Fi Protected Setup): If your Wi-Fi
router supports WPS, you can connect the
camera to your Wi-Fi network using WPS.
For details, see the camera's User Guide.
WPS/
RESET
Short Press to trigger WPS and Press and hold
for 5 seconds to trigger Reset.
2
Mount Base
2
Mount Base
Step Three – Relocate
Place the camera where you want it. You
can place it on a flat surface, or mount it
as shown on the mounting section of this
guide.
Mounting Kit
Camera
Base
Wall mount kit
Ceiling mount kit
3
Secure Camera
3
Secure Camera
View and Enjoy
View live video using the tpCamera
app or TP-LINK Cloud website.
Via tpCamera: On the "My Cam" screen,
tap your camera to view video. Change
the camera angle using the pan and tilt
controls.
Via TP-LINK Cloud website: Log in at
and select your
https://www.tplinkcloud.com
camera to view live video.
©2016 TP-LINK

Advertisement

loading

Summary of Contents for TP-Link TL-NC450

  • Page 1: Wall Mounting

    Internet tap your camera to view video. Change the camera angle using the pan and tilt Smartphone Wireless Router controls. Camera Via TP-LINK Cloud website: Log in at Outlet and select your https://www.tplinkcloud.com Camera camera to view live video. Outlet...