Figure 29. Installing the card reader bracket
7. Connect the new card reader cable to the system board.
8. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 43.
Replacing the internal speaker
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 16.
2. Remove the front bezel. See "Replacing the front bezel" on page 17.
3. Remove the optical drive. See "Replacing the optical drive" on page 18.
4. Remove the storage drive bracket. See "Replacing the storage drive" on page 20.
5. Disconnect the internal speaker cable from the system board.
6. Replace the internal speaker.
Figure 30. Removing the internal speaker
.
Chapter 4
Replacing hardware
25