FILA FAY001CH User Manual

1
Design of the Watch
Thank you for purchasing this watch.
Please read this manual thoroughly before using the watch!
Stopwatch
Minute Hand
Hour
Hand
Stopwatch
Hour Hand
Small
Second Hand
Stopwatch
Second Hand
2

Specifications

• MIYOTA OS10
• Chronograph with date
• Stainless steel case and silicon strap
• 10 ATM
* These specifications might be changed without prior notice.
3

Date and Time Setting

N 1
1. - 2.
1. Pull out the crown to the first click.
2. Turn the crown counter-clockwise to the date desired.
3. Pull out the crown to the second click when the second hand
is at the 12 o'clock position. It will stop on the spot and rotate
the hour and minute hands by turning the crown.
4. Push the crown back in to the normal position in accordance
with a time signal. The small second hand begins to run.
NOTE
- Do not set the date hand between 9:00p.m. and 1:00a.m.
Otherwise, the day may not change properly. If it is necessary
to set the date during that time period, first change the time
to any time outside it, set the date and then reset the correct
time.
Minute
Hand
Stopwatch
Start /Stop
[A]
N 1 2
Stopwatch
Reset
[B]
N: Normal
Date
1: First Click
2: Second Click
N 1 2
3.
FILActive
FAY001CH
www.fila.com/watch
4

Using the Stopwatch

Standard Measurement
Start
[A]
N
1. Press [A] to start counting, press [A] to stop counting.
2. Press [B] to reset the stopwatch.
This stopwatch is able to measure and display time in 1/1
second united up to maximum of 11 hours 59 minutes 59
seconds.
Stopwatch will stop automatically after running continuously for
11 hours 59 minutes 59 seconds.
Accumulated Elapsed Time Measurement
Start
[A]
N
Time 1 + Time 2 = Accumulated Elapsed Time
1. Press [A] to start counting, press [A] to stop counting.
2. Press [A] to start continuously counting.
3. Press [A] to stop and review the accumulated elapsed time.
4. Press [B] to reset.
Note: Restart and stop the stopwatch can be repeated as many
times as necessary by pressing [A].
User
MANUAL
FM-720.1
Stop
[A]
Reset
Stop
[A]
Start Stop
[A] [A]
Time 1
Time 2
[B]
Reset
[B]