Download Print this page
Regalo FLEXI GATE FORM 1175 Owner's Manual
Regalo FLEXI GATE FORM 1175 Owner's Manual

Regalo FLEXI GATE FORM 1175 Owner's Manual

Safety gate

Advertisement

Quick Links

FLEXI GATE form
MODEL NO:1175/1180
Owner's Manual
READ ALL INSTRUCTIONS BEFORE ASSMBLY AND
USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE.
Regalo International, LLC.
14305 Southcross Drive, Suite 100,
Burnsville, MN 55306
Phone: 952-435-1080
FAX: 952-435-1088

Advertisement

loading
Need help?

Need help?

Do you have a question about the FLEXI GATE FORM 1175 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Regalo FLEXI GATE FORM 1175

  • Page 1 FLEXI GATE form MODEL NO:1175/1180 Owner’s Manual READ ALL INSTRUCTIONS BEFORE ASSMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. Regalo International, LLC. 14305 Southcross Drive, Suite 100, Burnsville, MN 55306 Phone: 952-435-1080 FAX: 952-435-1088...
  • Page 2 Use only with the locking/latching mechanism securely engaged. To prevent falls,NEVER used at the top of stairs. Contact Regalo for questions and replacement parts. If in doubt about the use of your gate, call our customer care line 952-435-1080. Regalo International, LLC.14305 Southcross Drive,Suite 100, Burnsville, MN 55306.Made in China...
  • Page 3 Check to make sure you have the following components before you begin to set up your gate. (1). Folded Gate Frame, and Wall Mounting Assembly (2). Mounting Screws x 8 pcs. (1) 1 pc (2) 8 pcs...
  • Page 4 Step 1. Preparing to Install your Gate Begin by unfolding the gate frame. To do this simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram 1. Loosen the knobs enough to allow the gate to swing open freely.
  • Page 5 Step2: Move the gate to the side of the wall opening then bring the Wall Mounting Hinge to the wall as shown in Diagram 2. Diagram 2...
  • Page 6 Step 3: Apply a screw driver to fix the Wall Mounting Hinge on to the wall as shown in Diagram 3. Diagram 3 Step 4: Repeat the Step 2 and 3, on the other end of the gate. Go back an tighten all Locking Knobs. When this is done, the gate is ready to use on the gate opening.

This manual is also suitable for:

Flexi gate form 1180