Hardware; The Dell Poweredge Fx2/Fx2S And Supported Modules - Dell PowerEdge FX2 Configuration Manual

Upgrading from 10gbe pass-through modules to fn410s i/o modules
Hide thumbs Also See for PowerEdge FX2:
Table of Contents

Advertisement

2

Hardware

This section briefly describes the hardware used in this guide.
2.1

The Dell PowerEdge FX2/FX2s and supported modules

The PowerEdge FX2 and FX2s enclosures are 2U, hybrid, rack-based computing platforms. They combine
the density and efficiencies of blades with the simplicity and cost benefits of rack-based systems.
Note: This guide applies to either the PowerEdge FX2 or FX2s chassis. The FX2 does not offer PCIe
expansion slots. The FX2s includes eight PCIe expansion slots, as Figure 2 shows.
5
PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules | version 1.0
Dell PowerEdge FX2s (front) with one PowerEdge FC630 server installed
Dell PowerEdge FX2s (back) with two PowerEdge FN410S IOMs installed

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents