Modbus Rtu Display Menu - Siemens SITRANS F M MAGFLO series Operating Manual

Modbus RTU RS-485
4.2 Modbus RTU display
menu
4. Commissioning
To change (or view) the Modbus RTU settings from the keypad display.
1. Press [Top key]
2. Type in password (1000) by pressing [Change key]
[Lock key] and hold for two seconds
3. The display now says "Basic settings"
4. Press [Forward key]
5. Press [Lock key]
6. You can now cycle through all the Modbus RTU settings by pressing [Forward key]
7. Press [Top key]
SFIDK.PS.023.D2.02
for two seconds. (Note: For "View" mode only, skip steps 2 & 3).
until you reach the "Modbus RTU module" menu item
for two seconds and you return to 1.
two times, and then press
9