Compatible product
Outdoor unit
Controller
Conventional communication outdoor unit requires interface module (MIM-N01) to establish connection
MIM-B13D, MIM-B13E, MIM-B04A Interface modules cannot be connected.
To connect ERV, MIM-N10 interface module is required.
3) Description of parts
②
⑧
⑦
⑥
No.
Name
LCD On/Off button and
①
Indoor unit operation indicator
②
SD card slot
③
Power terminal
④
Reset button
⑤
DI-1 terminal
⑥
DI-2 terminal
⑦
DO Terminal
⑧
485 communication terminal
AM
X
OnOff controller (MCM-A202DN)
Touch centralized controller (MCM-A300N)
DMS2 (MIM-D00AN)
BACnet gateway (MIM-B17N)
Lonworks gateway (MIM-B18N)
Button : Turn on/off the LCD screen
Indicator
- Blue : Turns on if any one of the indoor unit is in operation.
- Red : Turns on if nay one of the indoor unit has an error
Use to back-up data on SD card or updating S/W
Use to reset Touch centralized controller
Terminal block for connecting digital input signal from 3rd party device.
Terminal block for connecting digital input signal from 3rd party device.
Terminal block for digital output signal.
- Short : When any one of indoor units turns On
- Open :When all indoor units are off
controller or DMS2 (R1/R2)
①
③
④
⑤
Description
63