Samsung MR-DH00 Technical Data Book page 20

Control Systems
Individual control systems
I I
3. Wired remote controller
MWR-WE10N
4) Option function
S
ervice mode
How to set the service mode
Note
While setting the data, you can use the [∧]/[∨] buttons to set the range of SEG
(Main menu) is displayed press the [∧]/[∨] button to select no.1.
(2) Press the [＞]
Press the [∧]/[∨] button and select no.1
(3) Press the [＞]
When you enter the setting stage, the current setting value will be displayed.
(4) Press the [＜]/[＞]
Press the [∧]/[∨] button to select no.1.
Save the setting value and exit to sub menu.
20
(1) If you want to use the various additional functions for your Wired
time for more than three seconds.
(2) Refer to the list of additional functions for your Wired Remote Controller
Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button
to enter the sub-menu setting screen.
Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button
to enter data setting screen.
When you enter the setting stage, the current setting will be displayed.
Refer to the chart for data settings.
Using the [∧]/[∨] buttons, select the settings. Press the [＞] button to move to
the next setting.
SEG1: Heat pump indoor unit
SEG2: Use wireless remote controller
SEG3: Master wired remote controller