Rinse Aid - Kenmore 1469 Use & Care Manual

IMPORTANT: The dishwasher is designed to use rinse aid. The
use of rinse aids greatly improves drying by allowing water to
drain from the dishes after the final rinse. Rinse aids also keep
water from forming droplets that can dry as spots or streaks.
Adding Rinse Aid
The frequency of dishwasher use and the rinse aid dispenser
setting will affect how often you need to refill the rinse aid
dispenser. If the rinse aid level is low, the Rinse Aid light on the
control panel illuminates.
1. To add rinse aid, push the button on the rinse aid dispenser
to open the lid.
2. Pour rinse aid into the opening until the dispenser is full. Do
not overfill.
3. Clean up any spilled rinse aid. Spilled rinse aid can create
excessive suds.
4. Close the lid to lock the dispenser.
NOTE: Open the dishwasher door completely to read the
correct fill level.

Rinse Aid

Full
Add
Rinse Aid Setting
Your rinse aid dispenser is adjustable. For most water
conditions, the factory setting will give good results. If you have
hard water and notice calcium buildup on your dishware, you
may want to try a higher setting. If you notice foam in your
dishwasher, use a lower setting.
Adjusting the Rinse Aid Dispenser Setting
Open the dispenser lid and turn the arrow to the right or left to
select a lower or higher setting.
Rinse-aid indicator
Rinse-aid adjustment lever
11