Fitting Of Dial Pointer - Sharp WF-1000W Service Manual

Portable radio cassette recorder

Hide thumbs Also See for WF-1000W:

Service manual (20 pages)

Table of Contents

WF-1000W

1. Remove the Main PWB, the Graphic Equalizer PWB, the

Volume PWB and the Fine Tuning PWB. (See Figure 5-2

in the "Disassembly" on page 5.)

2. Remove the dial pointer guide and PWB.

3. Insert the dial pointer from

the tuner gear and then pass it through

4. Replace the Main PWB, the Graphic Equalizer PWB, the

Volume PWB and the Fine Tuning PWB.

5. Rotate the tuning knob in the arrow direction until it stops.

(Set the tuner variable capacitor to "0" point (F-LOW

state).)

6. Adjust the dial pointer so that its stopper becomes the

Figure 4-2 position. (Adjust the engagement of the pointer

gear and the tuner gear to get the minimum space between

the PWB and the stopper.) This position is the "0" point.

7. Screw up the PWB and the dial pointer guide.