Download Print this page

Russound BTA-2 Installation Manual

Inline bluetooth local input module for a-bus systems

Advertisement

Quick Links

Safety Instructions
1. Read Instructions - All the safety and operating instructions
should be read before the equipment is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the equipment in the
operating instructions should be adhered to.
4. Follow Instructions - Follow all operating and user
instructions.
5. Water and Moisture - The equipment should not be used
near water; for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool. Not for outdoor use.
6. Heat - The equipment should be situated away from heat
sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.
7. Power Sources - The product should be connected to a
power supply only of the type described in the operating
instructions or as marked on the equipment.
8. Grounding or Polarization - Precaution should be taken
so that the grounding or polarization means of the product
is not defeated.
9. Avoid spills and foreign objects. Ensure liquids and objects
don't get into the product enclosure through any openings.
10. Damage Requiring Service - The equipment should
be serviced by qualified service personnel when: the power
supply cord or the plug has been damaged; objects have
fallen, liquid has been spilled into the equipment; the
equipment has been exposed to rain; the equipment does
not appear to operate normally; or the equipment has been
dropped or the enclosure is damaged.
11. Servicing - The user should not attempt to service
the equipment beyond that described in the operating
instructions. All other servicing should be referred to qualified
service personnel.
12. Care – From time to time you should wipe any dust
accumulation from the equipment with a soft dry cloth.
Copyright ©2015 Russound® All rights reserved. All trademarks are
the property of their respective owners. Russound is not responsible
for typographical errors or omissions. Specifications are subject to
change without notice.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. Other
trademarks and trade names are the property of their respective owners.
A-BUS® is a registered trademark of LeisureTech Electronics Pty
Ltd Australia. This product may be covered by one or more of the
following patents: US 7,181,023; 7,668,318; 6,389,139;
AU 739808; NZ 502982; MX 241196; Canada CA 2301062.
Limited Warranty
The Russound BTA-2 is guaranteed for two (2) years from the date
of purchase against all defects in materials and workmanship. During
this period Russound will replace any defective parts and correct any
defect in workmanship without charge for either parts or labor. For
this warranty to apply, the unit must be installed and used according
to its written instructions. If service is necessary, it must be performed
by Russound. Russound assumes no responsibility for defects
resulting from abuse or servicing performed by an agency or person
not specifically authorized in writing by Russound. Damage to or
destruction of components due to improper use voids the warranty.
In these cases the repair will be made at the owner's expense.
Accidental damage and shipping damage are not considered defects
under the terms of the warranty. To return for repairs, the unit must
be shipped to Russound at the owner's expense, along with a Return
Authorization number and documentation explaining the nature
of the service required. Any product returned without prior written
permission will be returned to sender. Russound sells products only
through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any Russound product purchased
from an unauthorized dealer or other source, including retailers,
mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an
unauthorized source or other manner not authorized by Russound
shall void the warranty on the applicable product.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
This device and its antenna must not be located or operated in
conjunction with any other antenna or transmitter.
Russound, Inc.
1 Forbes Rd., Newmarket, NH 03857, USA
tel 603.659.5170 • fax 603.659.5388 www.russound.com
technical support: 866.888.7466 e-mail: tech@russound.com
Inline Bluetooth® Local Input Module
Overview
The BTA-2 provides a local wireless input connection
for the purpose of streaming audio from sources such as
smart phones, tablets and computers, etc. with Bluetooth®
capability, to individual A-BUS® equipped rooms. When the
BTA-2 is paired, it will automatically switch the music source
from the main system source to the local Bluetooth source.
This local connection will remain until pairing is disconnected
or the Bluetooth device is out of range for longer than 3
minutes.
28-1398 03.16.15
BTA-2
for A-BUS® Systems
Installation Manual
BT
Lo

Advertisement

loading

Summary of Contents for Russound BTA-2

  • Page 1 Safety Instructions Limited Warranty The Russound BTA-2 is guaranteed for two (2) years from the date 1. Read Instructions - All the safety and operating instructions of purchase against all defects in materials and workmanship. During should be read before the equipment is operated.
  • Page 2 Bluetooth® as a Main Source The BTA-2 is connected to the CAT-5 cable line between the hub The BTA-2 can be used as an input device in small installations, such and the A-BUS Keypad using RJ-45 connectors (TIA568A). It also can as hotel rooms, where transmission range is not a problem.