Canon imageRUNNER 2545 User Manual page 79

2
Squeeze the lever on the side guide. Without releasing the lever,
slide the side guide leftward or rightward to align it with the mark
for the desired paper size.
3
Squeeze the lever on the front guide. Without releasing the lever,
slide the front guide backward or forward to align it with the mark
for the desired paper size.
5
IMPORTANT
Adjust the guides correctly. Failure to do so may cause paper jams or dirty prints, or
make the inside of the machine dirty.
4
IMPORTANT
• Rolled or curled paper must be straightened out prior to use.
• Make sure that the height of the paper stack does not exceed the loading limit mark
(
• Make sure that the paper size/type setting of the paper drawer matches the size/type
of the paper that is being loaded.
5-6
Paper Drawers
Side Guide
Front Guide
) both on the left and back sides of the slide guides.
Lever
Lever
Load the appropriate size of
paper into the paper drawer.
CAUTION
Take care not to cut your hands on
the edges of the paper when
loading it into the machine.